CRL Adjustable Pinnacle 337 Series Wall Mount Full Back Plate Hinge/ BRUSHED COPPER #P1N337BCO

CRL Adjustable Pinnacle 337 Series Wall Mount Full Back Plate Hinge/ BRUSHED COPPER #P1N337BCO

  • $98.99


  • Adjustable to Any Angle Up To 90 Degree Without Removing Door
  • Available in Several Beautiful Finishes
    • Three Year Warranty
  • Adjustable Wall Mount Full Back Plate
    • Use Monolithic Tempered Glass

CRL Adjustable Pinnacle Series Hinges take our popular Pinnacle Hinge to a new level. Adjustment to accommodate the desired angle (up to 90 degree) is done after the door is installed. Once the door is hung, simply loosen the Allen set screws and turn the door to the desired closed position. By merely tightening the Allen screws your door will self-center to the desired closed position. The door can swing 90 degree inward and also 90 degree outward (adjusting angle from factory set position will reduce 90 degree swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degree inside the shower area, thus having the door close snugly against the jamb.​

Height:3-1/2" (89 mm)
Width:2-3/16" (56 mm)
Ship Via:Can Ship UPS
Shipping Weight:2 lb (907g)

Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm).

Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).

SPECIFICATIONS:
Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass
Special Feature: Adjustable to any angle up to 90 degree without having to take door down.
Construction: Solid Brass 
Hinge Swings: 90 degree in and 90 degree out (at factory set position).
Closing Type: Self-Centering when within 15 degree of closed position.
Cut-Out Required
Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. P1N13 Gasket Pack must be purchased separately for use with 5/16" (8 mm) thick tempered glass.

NOTE: Door glass width may require alteration from standard clearance deductions when adjusting angles.​​